Filter By:
- 24-Inch & Smaller (10)
- 26-Inch (10)
- 650B (54)
- 29-Inch (57)
- 700c, 27-Inch & 650c (103)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Wheels
$1,100.00
Performance Upgrade Made Easy
The C38 brings carbon fiber high performance to the real world. It's a versatile all-rounder equally at home crushing gravel washboards and summiting alpine passes. Optimized for use with modern wide tires, providing the right amount of sidewall support to facilitate surefooted handling in all conditions, the C38 wheelset is a great handling, lively climbing, robust all-road performer that also aerodynamically outperforms many deeper, aero-specific rims that cost twice as much.
Carbon wheels are a true performance upgrade to any bike, but too often the price tag puts them out of reach. The Rapide C38 shatters that barrier and brings a class-leading Roval carbon rim and DT Swiss reliability together to provide riders with the best performance carbon wheel per dollar.

$1,050.00
Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all.
Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. At the center of the 303 Firecrest Tubeless is a versatile and durable new hubset, the German-engineered ZR1 DB. This hubset features 66 points of engagement for quicker response.
The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits.
- New Zipp graphics and cosmetic identity that scream speed
- Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile
- Lighter weight than its predecessor, making it nimble and fast
- Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire.
- Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road
- 40mm rim depth makes a light and aero wheel in every situation
- Ships with 12mm end caps
- Center Lock rotor interface (lockring included)

$1,400.00
One wheel to rule all roads. Road light, off-road tough, smooth as butter, Terra CLX wheels bring leading-edge performance to the diverse needs of mixed-terrain rides. These are the lightest gravel wheel on the market. They sport 25mm internal-width rims, deliver a durable and exceptionally smooth ride, are compatible with 28-42mm tires at up to 90 PSI, and they come with a lifetime warranty and no-fault crash replacement.
- Rim Type: Carbon Clincher, tubeless-first
- Rim Material: Advanced Carbon Composite
- Rim Width (internal): 25mm
- Rim Depth: 32mm
- Rear Spoke Pattern: One-cross/Two-cross (2:1)
- Spoke Count: 24
- Spoke Type: DT Swiss Aerolite T-head
- Nipple Type: DT Swiss Pro Lock Alloy hexagonal
- Spoke Length: Drive-Side/Non-Drive: 272mm/277mm
- Rear Hub: Roval AFD2, Center Lock, DT Swiss EXP internals, Shimano HG, 142x12mm thru-axle end cap
- Assembly Method: Handbuilt
- Extras: Roval padded wheelbag, Roval tubeless rim tape and valves (pre-installed)
- Wheelset Weight (front and rear with rim tape and tubeless valves): 1296g

$60.99 - $62.49
Sta-Tru Double Wall Front Wheels.
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 26-inch x 1 3/8
- ISO Diameter: 590 / 26 x 1 3/8-inch
- Front Axle: 3/8-inch x 100mm
- Valve: Schrader
- Tire Type: Clincher

$77.49 - $92.99
- STW ST1 26.5mm wide alloy rims
- KT QR ATB 9mm/100/108 axle
- Black or Silver UCP spokes

$55.99 - $58.99
Sta-Tru Double Wall Rear Wheels.
- Wheel Size: 20-inch
- ISO Diameter: 406 / 20-inch BMX
- Valve: Schrader
- Tire Type: Clincher

$1,543.90
The ARC 1400 DiCut delivers its full potential whenever your race turns nasty. In gusty wind conditions and on hilly, twisting courses, these wheels give you a decisive advantage, allowing you to stay in the aero position and save valuable power. Small and light riders will love the wheels' superior aero stability, making them a perfect choice for almost every terrain.
- AERO+ optimized rims by Swiss Side
- Stainless steel bearings

$849.95
CZR i23 gravel wheels are designed to minimize weight while blending stiffness and compliance to maximize power transfer and increase comfort. CZR i23 rims feature a 24mm section depth to maximize energy transfer, reduce weight, improve vertical compliance, and reduce rider fatigue while a hooked bead also improves tire retention with high pressure adventure road and gravel tires.
CZR I23 CARBON RIMS
Reinforced spoke beds improve overall wheel strength and durability while also minimizing weight in areas where less strength, and therefore material, is needed. CZR i23 rims feature 3mm of asymmetrical spoke offset and a 24mm section depth to improve radial stiffness and maximize energy transfer without being affected by crosswinds like other wheels with deeper profiles.
SOLID STRIP & TCS TAPE
Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke.
2-CROSS OR 3-CROSS LACING
CZR i23 gravel wheels with 24 spokes feature a 2-cross lacing pattern to increase radial stiffness and decrease weight. CZR i23 wheels with 28 spokes feature a 3-cross pattern to increase durability while still providing ample radial stiffness due to the additional spokes.
FREQUENCY HUBS
The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Frequency hubs laced to CZR i23 wheels feature lightweight pawl springs that minimize drag and therefore improve efficiency for drop-bar usage.
AERODYNAMIC WING SPOKES
Pillar racing spokes that are cold-forged into an aerodynamic wing shape that reduces drag at the trailing end of each spoke. As a result, wing spokes improve overall efficiency while still retaining the gram-conscious weights of traditional bladed spokes.
SAPIM ALLOY NIPPLES
All CZR i23 wheels feature time-tested Sapim alloy nipples to further reduce overall wheel weight while still exceeding the durability requirements of gravel.
COUNTLESS CONFIGURATIONS
CZR i23 wheels are available in a 24-spoke option for riders looking to minimize weight and increase compliance, while the 28-spoke versions are best for heavier or more aggressive riders who prioritize stiffness and durability. All CZR i23 wheels are available with Centerlock or 6-bolt rotor mounts. CZR i23 front wheels use a 12x100mm Frequency hub, but 15mm end caps are also available separately on our Replacement Hub Parts page.
WHY CHOOSE CZR I23?
Fast and light CZR i23 gravel wheels were designed to minimize weight and maximize compliance on rough gravel roads. With front-wheel weights starting at 620g and rears at 775g, they also deliver the greatest strength-to-weight ratio of any gravel wheelset on the market. We even stand behind them with our Ride With Confidence Guarantee for those few-and-far-between crash replacement cases. Read below for more info.

$48.49 - $51.49
Sta Tru Rear Wheels
- Single Wall rim
- Wheel Size: 20-inch
- ISO Diameter: 406 / 20-inch BMX
- Valve: Schrader
- Tire Type: Clincher

$975.90
Tailored to the needs of performance orientated cross-country riders, the XRC 1501 SPLINE ONE leaves nothing to be desired. Lightweight 30 mm wide carbon rims offer ideal support for modern XC tires. Rolling on race proven and super durable 240 hubs and Competition Race spokes, allowing every bit of energy to be transferred into forward motion.
- Designed for Cross Country applications
- Carbon rim with 30mm internal width
- 240 hub
- Competition race spokes and Squorx nipples

$255.90
Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel.
- Intended use = All-Mountain/Trail, Enduro and Freeride
- Tubeless ready, 30mm wide and light rim
- Straight-pull hubs/spokes built with a 3-cross pattern
- Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

$301.90
Building a wheel that performs well anywhere is the idea behind the ER 1600. The wide rim and superb ratchet drive system bring traction and reliability into the mix and provide a wheel that is perfect for year round riding on road or mixed terrain. The 23mm rim height offers a better climbing wheel while the 32mm height is a stout for those that are hard on their wheels.
- 350 based Spline hub
- Straight-pull hub and spokes are laced 2-cross
- Includes tubeless ready tape and tubeless valve

$301.90
Whether you are cutting through mud, dancing on icy, frozen trails or exploring dusty desert roads, you will feel the efficiency of these wheels. CR 1600's are ready to attack the challenges you put in front of them.
- 350 based Spline hub
- Straight-pull hub and spokes are laced 2-cross
- Includes tubeless ready tape and tubeless valve

$378.90
Versatility. A mountain bike is meant to go up and down mountains and to provide fun while doing so. The H1700 Spline do precisely that. And since e-bikes allow the rider to go up and down many mountains in one ride, reliability and weight is key.
- 350 based Spline hub
- E-bike specific straight pull spokes are built with a 3-cross pattern
- Includes tubeless tape and tubeless valve

$1,260.90
The new standard in modern day, high performance XC and All Mountain wheelsets. With its hookless full carbon and tubeless ready rim, the XRC 1200 strikes a perfect balance between lightweight and aggressive riding-readiness. Its intricately machined hubshell is superlight while the 25mm tall rim has the inherent stiffness necessary for efficient riding and to precisely hold a line. Together with the renowned DT Swiss build quality, this wheel really sets the benchmark for going fast up and down, whether it's between the tape or not.
- Tubeless ready wide and light carbon rim
- 180 EXP hub with straight-pull DT spokes, 3-cross pattern
- Factory installed tubeless-ready tape
- Includes tubeless valve, 6-bolt rotor adapter, tools and wheel bag

$975.90
The XMC 1501 SPLINE ONE was designed for all kinds of mountain adventures. A 30 mm tubeless optimized carbon rim easily supports wider tires, while the double butted competition race spokes and 240 hub completes this durable and versatile wheel.
- Designed for All Mountain applications
- Carbon rim with 30mm internal width
- 240 hub
- Competition race spokes and Squorx nipples

$616.90
The XM 1700 SPLINE wheels were designed to dominate the mountain. Light and robust welded rims with perfect tubeless compatibility for grip and puncture resistance. Built on reliable 350 hubs with 36 tooth ratchet engagement.
- Welded Aluminum rim with 30mm internal width
- 350 hub with 36 point SL Ratchet system
- Competition spokes and Squorx nipples
- Designed for All Mountain applications

$975.90
EXC 1501 SPLINE ONE combines everything a modern enduro rider wants in a wheel. The 30 mm wide carbon rim gives you the precision to stay on track even on the trickiest lines while a 240 hub keeps it spinning. Both components are held together by performance weight optimized competition race straightpull spokes.
- Designed for Enduro applications
- Carbon rim with 30mm internal width
- 240 hub
- Competition race spokes and Squorx nipples

$505.90
On an eMTB you run into trail sections much faster than you have ever before considered possible. The H 1700 SPLINE 30 has the power to get you out of such situations as a winner and not face down in the dirt. Steering precision is covered by the strong spokes and the trademark DT Swiss wheel build with high and even spoke tension. The rim can take tires suited for fast riding on rugged terrain and supports them perfectly, even at low pressures. Reliable Ratchet System hubs finally make sure that you can come back and attack those gnarly sections of trail time and time again.
- 350 based Spline hub with 24 tooth ratchet system and steel freehub body
- E-bike specific straight pull spokes are built with a 3-cross pattern
- Includes SRAM XD driver/end cap, tubeless tape and tubeless valve

$213.90
When heavy duty riding is your passion, the C 1800 is the right partner fro any mission. It is right at home at anything from jumping obstacles, cutting through mud and sprinting up steeps. Trademark DT Swiss reliability coming from precision hubs, sturdy bladed spokes and superb wheel build guarantee trouble free rides.
- Spline hub
- Straight-pull hub and spokes are laced 2-cross
- Includes tubeless ready tape and tubeless valve

$843.90
The pinnacle of aluminum road wheels. The ceramic OXIC surface coating brings brake performance to rim brakes like it has never be seen before. The rims are wide, asymmetric, and lightweight, making for an outstanding stiffness to weight ratio. If set up tubeless, supreme comfort and grip are added to the athletic character.
- OXiC rim surface technology for improved braking performance and wear
- Tubeless Ready rim compatible with standard clincher tires
- 240 hub with 36t SL ratchet system and ProLock Squorx ProHead spokes built with two-cross lacing
- Factory installed tubeless-ready tape
- Includes titanium RWS skewer, tubeless valve, 10-speed spacer and Swissstop BXP blue brake pads

$1,591.90
The Aero+ concept comes into the E-road segment. With the HEC 1400 Spline, DT offers the perfect endurance wheelset for E-road bikes, delivering all the advantages of the Aero+ concept mixed with E-bike- specific components to ensure a long-lasting and trouble-free ride. A valuable upgrade for any high-end E-road bike, these wheels will bring a big smile to the rider's face and many envious glances from overtaken riders.

$1,721.90
The new standard in modern day, high performance cross country wheelsets. With its hookless full carbon and tubeless ready rim, the XRC 1200 strikes a perfect balance between lightweight and aggressive riding-readiness. Its intricately machined hubshell is superlight while the 25mm tall rim has the inherent stiffness necessary for efficient riding and to precisely hold a line. Together with the renowned DT Swiss build quality, this wheel really sets the benchmark for going fast up and down, whether it's between the tape or not.
- Tubeless ready wide and light carbon rim
- 180 Ratchet EXP 36pt hub with straight-pull DT spokes, 3-cross pattern
- Factory installed tubless-ready tape
- Includes tubeless valve, 6-bolt rotor adapter, XD and MicroSpline freehub bodies, tools and wheel bag

$611.90
The pinnacle of aluminum road wheels. The ceramic OXIC surface coating brings brake performance to rim brakes like it has never be seen before. The rims are wide, asymmetric, and lightweight, making for an outstanding stiffness to weight ratio. If set up tubeless, supreme comfort and grip are added to the athletic character.
- OXiC rim surface technology for improved braking performance and wear
- Tubeless Ready rim compatible with standard clincher tires
- 240 hub and ProLock Squorx ProHead spokes built with radial lacing
- Factory installed tubeless-ready tape
- Includes titanium RWS skewer, tubeless valve and Swissstop BXP blue brake pads

$1,230.90 - $1,257.90
The HXC 1501 SPLINE ONE LS are extra lightweight carbon eMTB wheels are engineered for riders looking for outstanding agility. Thanks to the low weight carbon rims, riders benefit from increased agility and dynamism when going uphill and downhill, while withstanding the increased torques of eMTBs. The spokes were designed with specific diameters to align light weight and resistance. Inside the 240 hub, oversized bearings support the additional loads of eMTBs. Each component has been designed with the specific aim of delivering advanced agility to find flow and fun on the trails.
- Built to provide ultimate riding agility for light eMTBs
- Perfect balance between low weight and resistance, ready to go faster in the ups and the downs
- Hybrid-specific spoke design provides an advanced riding experience, combining resistance and lightweight
- The 240 Hybrid LS hub features larger bearings for improved durability and rolling efficiency
- Ratchet EXP OS, optimized for the requirements of an eMTB, with a bigger threaded ring for direct acceleration through a torque-resistant freehub system

$352.90 - $379.90
Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel.
- Intended use = All-Mountain/Trail, Enduro and Freeride
- Tubeless ready, 30mm wide and light rim
- Straight-pull hubs/spokes built with a 3-cross pattern
- Includes Tubeless Valve and Tape

$277.90 - $301.90
When heavy duty riding is your passion, the C 1800 is the right partner fro any mission. It is right at home at anything from jumping obstacles, cutting through mud and sprinting up steeps. Trademark DT Swiss reliability coming from precision hubs, sturdy bladed spokes and superb wheel build guarantee trouble free rides.
- Spline hub with 3-pawl system
- Straight-pull hub and spokes are laced 2-cross
- Includes tubeless ready tape and tubeless valve

$69.00
The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.

$499.99
Being a company of mountain bikers, when Race Face set out to design a new wheel the goal was simple: make the wheel they want to ride.
R is for rally.
HUB
- Large oversize flange for improved bracing angle
- Larger bearings
- No bearing adjuster
- Wider bearing stance
- 6 double tooth pawls (3 engage at a time)
- 120 points of engagement (3 degrees)
- Each pawl has its own spring
- Balanced spoke counter bore
- Tool-free interchangeable end caps (sold separately)
RIM
- 30mm Internal width tubeless ready rim
- 4.5mm Offset – Improves spoke balance and wheel stiffness
- New stronger alloy for highest impact resistance of any Race Face or Easton rim
- High gloss black water transfer logos
Page 1 of 7
Next page