Parts & Accessories

Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

Wind fairing that redirects airflow over roof rack for a quieter ride. - No tools required for assembly or installation. - New system-specific clamps (included) provide the roof rack fairing a clean and secure mounting for our - AeroBlade, AeroBlade Edge, and SquareBar systems. - AeroBlade and AeroBlade Edge clamps give full access to the upper T-track for quick accessory mounting and removal. Technical specifications - Length: 38-inch - Fits Thule AeroBlade - Fits Thule SquareBar

Replacement ratcheting cradle straps (for 2 bikes). - Replaces ratchet style straps on Thule Apex XT, Thule Helium Pro, Thule Camber, and Thule Range - Contains six ratchet style straps (four cradle straps and two anti-sway)

With Thule's Fat Tire Kit for T2 Racks you can finally throw your fat bike on your Thule rack (sold separately) and head for the hills. Oversize wheel trays accommodate tires up to 5-inches wide and the tray has been shaped to work perfectly with even the widest treads. An extra-long wheel strap is included to make fastening your rear wheel a breeze. This kit attaches easily to your Thule T2 hitch rack (sold separately) and includes the mounts needed for a single bike.

Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely.

Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.

Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.

Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.

Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

Thule's Load Bar End Caps are replacement end caps for rectangular load bars.

Thule One-Key Lock Cylinders fit virtually all Thule rack feet, cargo boxes, bike trays, and accessories to safely secure your valuable bikes and rack components. Also, the Cylinders within each pack are matched so that the same key opens all the locks.

Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 4 locks, all using the same key

Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.

- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames

The lock comes with a burlap bag, dust cap, two keys, and a Kuat keychain bottle opener. 3/8" pin is for our 1.25" racks and the 1/2" pin is for our 2" racks.

Transfer cable lock kit including one locking cable per tray and a matching lock for the hitch pin.

Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

Rear wheel strap for Boa bike mount. Includes one strap.

The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core. Product Specs: - Weight: 0.02 lbs. - Limited Lifetime Warranty

Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2015 - 2019 Subaru Outback. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required - 33" crossbar spread allows most Yakima gear mounts - Snap-on covers to keep the elements out while the rack is removed - Weight: 1.35 lbs - Dimensions: L 5.50 in x W 1.50 in x H 2.75 in

Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2020+ Toyota Highlander. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required - 30 7/8" crossbar spread allows most Yakima gear mounts - Snap-on covers to keep the elements out while the rack is removed Product Specs: - Weight: 1.38 lbs.

The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad. PRODUCT DETAILS - Foam padding protects boats and other cargo from damage - Durable, ballistic nylon construction - Look and loop closures and 28” length perfectly fit around the LongArm crossbar - Center cutout allows side or centered placement on crossbar - Sold as a single pad TECHNICAL SPECS - Weight: 0.50 lbs - Dimensions: L 28.00in x W 3.00in x H 3.00in

Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 2 SKS Cores and matching keys - 2 keys included plus a control key

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 4 SKS Cores and matching keys - 2 keys included plus a control key

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 6 SKS Cores and matching keys - 2 keys included plus a control key

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 8 SKS Cores and matching keys - 2 keys included plus a control key

Thru-axle adapter works with WheelHouse to hold wheels with 12mm and 15mm thru-axle. - Easy cam lever for quick installation - Durable stainless steel skewer - Up to 110mm front hubs Product Specs: - Weight: 0.44 lbs. - Dimensions: L 9.00 in x W 0.75 in x H 2.00 in - Limited Lifetime Warranty